Stain & Finish in One
Tinted, semi-transparent, water-based finish for interior floors and furniture. Use Aqua Resin Floor Finish for priming and finishing heavily used surfaces. High abrasion resistance. BioShield Aqua Resin Floor Finish is formaldehyde free.
Application Areas: Use on absorbent surfaces made of wood. As a high abrasion-resistant finish, this product is suited for high traffic areas such as hallways and parquet floors. BioShield Aqua Resin Floor Finish is also well suited for doors, work surfaces, tables, stairs and other furniture.
Technical Qualities: Excellent flow, high water resistance, high strength and durability. Satin sheen, transparent.
Surface Preparation: Surface must be clean, dry, free of grease and absorbent. Before applying the first coat, all surfaces must be sanded no finer than 120 Grit. Exotic wood must be degreased prior to application of BioShield Aqua Resin Floor Finish.
Application: Apply BioShield Aqua Resin Floor Finish at a room temperature above 59 degrees F (15 C). Stir product well before use. (Extreme agitation such as heavy shaking or mixing by machine may cause surface bubbles and should be avoided.) Apply one priming coat by brush or short nap roller. Allow to dry. Light sanding between coats (220-320 Grit) is recommended for best results. After the first priming coat apply one additional thin and even coats color coat, and a third coat either clear or color depending on desired color density. Allow to dry between each coat, and optional sanding.
Coverage & Drying Time: 140-160 sq.ft. / Liter depending on thickness of coat.
Drying Time: Depending on temperature, humidity and surface, BioShield Aqua Resin Floor Finish dries within four-to-five hours between coats. The product will cure over a period of approximately one week to reach the final hardness.
Ingredients: Dispersion of Polyurethane in Water, Alcohol, Micro Wax, Silicic Acid, Silicone, Anti-skinning Agent.
Product contains less than 115 Grams of VOC per Liter.