High Solid Floor Oil #8

Size





Starting at: $7.50
Quantity to order:

Healthy for you, healthy for your feet.

BioShield High Solid Floor Oil is a solvent free finish for wood surfaces. Made from natural raw materials, the product supports the mechanical and chemical resistance of wood surfaces.

Application Range: Use as a protective, wood enhancing finish on wood floors and cork flooring. Interior use.

Technical Qualities: The product enhances the look and feel of natural wood and dries to a satin-matte sheen. This water-resistant floor & furniture finish is also suitable for kitchens and bathrooms. Resists staining from water, milk, fruit juices, beer, and wine within a certain time frame.  Any spilled liquid should be cleaned up right away.

Ingredients: Linseed Oil, Tung Oil, Linseed Stand Oil, Silicic Acid, Beeswax, Candelilla wax, Lead-Free Dryer (Zircon Octoat, Cobalt Octoat.)

Color: Clear to slightly amber colored.

General Surface Requirements: Surface must be firm, dry, absorbent, clean, free of grease, dust, and other loose particles. Light sanding (max. 100-120 grit) before application is recommended.

Method of Application:  Apply with trowel or spatula. Use a machine buffer (green pad) and work product into surface. All product must to be absorbed by the surface and no excess must be left on top of surface. Cork surface may need two coats applied in the same manner as above. Finish surface with 1-2 coats of BioShield Wax Finish #39.

Drying Time: After drying for approximately 12-24 hours—depending on climate, temperature, humidity and absorbency of surface—an additional coat may be applied.

Coverage: 200-300 square feet per liter, depending on absorbency of surface.

High Coverage!

0.75 Liter will cover up to 225 sq.ft. per 0.75 L. unit per coat
2.50 Liter will cover up to 750 sq.ft. per 2.50 L. unit per coat


Copyright © 2017 BioShield Paint - Eco Design Co. - All right reserved.