Our Resin Floor Finish is a clear to slightly amber traditional oil-based finish that is intended to be installed after priming the surface with BioShield Oil Primer #1 or #5. It creates a durable, flexible seal on many types of flooring, and comes in a gloss sheen.
Specifications: BioShield Resin Floor Finish is suitable for use on floors of all types including hardwood, softwood, adobe, stone, terra cotta, brick, and cork. The resulting finish is breathable and elastic and will create depth and dimension in flooring substrates of all types.
Application: Two to three coats of this product are recommended. Application is by brush. The surface should be absorbent, and free of dust, grease, wax, oil, nicotine and other contaminants. Wood surfaces should be primed with one to two coats of BioShield Oil Primer #1. Highly absorbent wood floors, adobe, terra cotta tile, and cork should be primed with one to two coats of #5 Penetrating Oil Sealer. As a general guide, you can plan on two coats of this product for new floors and one for recoat situations. Highly absorbent surfaces such as adobe or cork will perform best with three coats.
Coverage: BioShield Resin Floor Finish will cover from 120 to 160 square feet per liter, depending on substrate absorbency and other variables.
Drying time: Depending on climate and other variables, approximately 24 hours of drying time between coats is recommended. BioShield Resin Floor Finish will attain its full strength after curing for several days.
Ingredients: Linseed Oil, Soy Alkyd Resin, Colophony (Rosin), Isoaliphatics, Lead-free Dryers (Zircon, Cobalt Octoat), Silica, and Oximes (Anti-skinning Agent).
For Brush Application only. This Product must not be thinned or sprayed. |
